sbr130s3 1a sbr ? super barrier rectifier new product sbr is a registered trademark of diodes incorporated. features ? low forward voltage drop ? low reverse leakage ? ex cellent high temperature stability ? patented super barrier rectifier technology ? soft, fast sw itching capability ? 150oc operating junction temperature ? lead free/rohs compliant (note 1) ? ?green? dev ice (note 3) mechanical data ? case: sod-323 ? case material: molded plastic, ?green? molding compound. ? moisture sensitivity : level 1 per j-std-020d ? terminals: matte tin finish annealed over alloy 42 leadframe. solderable per mil-std-202, method 208 ? marking information: see page 2 ? ordering information: see page 2 ? weight: 0.004 grams (approximate) top view maximum ratings @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v rm 30 v rms reverse voltage v r(rms) 21 v average rectified output current t c =65c i o 1 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 20 a thermal characteristics characteristic symbol value unit maximum thermal resistance thermal resistance junction to ambient (note 2) r ja 488 oc/w operating and storage temperature range t j , t stg -65 to +150 oc electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition reverse breakdown voltage (note 4) v (br)r 30 - - v i r = 200a forward voltage drop v f - 0.39 0.31 0.42 0.36 0.43 0.34 0.46 0.39 v i f = 700ma, t j = 25oc i f = 700ma, t j = 150oc i f = 1a, t j = 25oc i f = 1a, t j = 150oc leakage current (note 4) i r - 8.0 4.0 12 5 20 10 50 15 a ma a ma v r = 10v, t j = 25oc v r = 10v, t j = 150oc v r = 30v, t j = 25oc v r = 30v, t j = 150oc notes: 1. rohs revision 13.2.2003. hi gh temperature solder exemption applied, see eu directive annex note 7. 2. fr-4 pcb, 2 oz. copper, minimum recommended pad layout per http:// www. d i odes.com/datas heets/ap02001.pdf. 3. diodes inc.?s ?green? policy c an be found on our w ebsite at http:// www. di odes.com/products/l ead_free/index.php. 4. short duration pulse test used to minimize self-heating effect. sbr130s3 document number: ds31099 rev. 5 - 2 1 of 3 www.diodes.com march 2008 ? diodes incorporated
sbr130s3 sbr130s3 document number: ds31099 rev. 5 - 2 2 of 3 www.diodes.com march 2008 ? diodes incorporated new product sbr is a registered trademark of diodes incorporated. t = 150c a t = -55c a t = 25c a t = 75c a t = 125c a t = 150c a t = 125c a t = 75c a t = 25c a t = -55c a fig. 3 total capacitance vs. reverse voltage 10 100 1,000 0 5 10 15 20 25 30 v , dc reverse voltage (v) r c , total capacitance (pf) t f = 1.0mhz ordering information (note 5) part number case packaging SBR130S3-7 sod-323 3000/tape & reel notes: 5. for packaging deta ils, go to our website at http://www.di odes.com/datasheets/ap02007.pdf . marking information d3 d3, je = product type marking code je
sbr130s3 package outline dimensions sbr130s3 document number: ds31099 rev. 5 - 2 3 of 3 www.diodes.com march 2008 ? diodes incorporated new product sbr is a registered trademark of diodes incorporated. d g h a b c e sod-323 dim min max a 2.30 2.70 b 1.60 1.80 c 1.20 1.40 d 1.05 typical e 0.25 0.35 g 0.20 0.40 h 0.10 0.15 j 0.00 0.10 0 8 all dimensions in mm suggested pad layout z x c g y dimensions value (in mm) z 3.75 g 1.05 x 0.65 y 1.35 c 2.40 important notice diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to any product herein. diodes incorporat ed does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the ri ghts of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes inco rporated and all the companies whose products are represented on our website, harmless against all damages. life support diodes incorporated products are not authoriz ed for use as critical components in life support devices or systems without the e xpressed written approval of the president of diodes incorporated.
|
